Compound | Amount | Unit | |||
---|---|---|---|---|---|
|
Na2SO4 | 3.00 | g | ||
|
KH2PO4 | 0.20 | g | ||
|
NH4Cl | 0.30 | g | ||
|
NaCl | 7.00 | g | ||
|
Trace element solution SL-11 | 1.00 | ml | ||
|
Selenite-tungstate solution | 1.00 | ml | ||
|
MgCl2 x 6 H2O | 3.10 | g | ||
|
KCl | 0.50 | g | ||
|
CaCl2 x 2 H2O | 0.15 | ml | ||
|
Yeast extract | 0.50 | g | ||
|
Sodium resazurin
(0.1% w/v) |
0.50 | ml | ||
|
NaHCO3 | 1.50 | g | ||
|
Na-L-lactate | 2.00 | g | ||
|
Neutralized sulfide solution 3% (w/v) | 15.00 | ml | ||
|
Distilled water | 1000.00 | ml | ||
1 Dissolve ingredients (except bicarbonate, lactate and sulfide) and sparge medium with 100% N2 gas for 30 - 45 min to make it anoxic. Dispense medium under same gas atmosphere into anoxic Hungate-type tubes or serum vials and autoclave. Add lactate and sulfide form sterile anoxic stock solutions prepared under 100% N2 gas and bicarbonate from a sterile anoxic stock solution prepared under 80% N2 and 20% CO2 gas mixture. Adjust pH of the complete medium to 7.2, if necessary. |
Compound | Amount | Unit | |||
---|---|---|---|---|---|
|
Na2-EDTA x 2 H2O | 5.2 | g | ||
|
FeCl2 x 4 H2O | 1.5 | g | ||
|
ZnCl2 | 70.0 | mg | ||
|
MnCl2 x 4 H2O | 100.0 | mg | ||
|
H3BO3 | 6.0 | mg | ||
|
CoCl2 x 6 H2O | 190.0 | mg | ||
|
CuCl2 x 2 H2O | 2.0 | mg | ||
|
NiCl2 x 6 H2O | 24.0 | mg | ||
|
Na2MoO4 x 2 H2O | 36.0 | mg | ||
|
Distilled water | 1000.0 | ml | ||
1 Dissolve EDTA in 800 ml distilled water, adjust pH to 7 using 2 N NaOH and add ferrous chloride. After ferrous chloride has dissolved add other compounds. Finally adjust pH to 6.0 and bring volume to 1000 ml. |
Compound | Amount | Unit | |
---|---|---|---|
|
NaOH | 0.5 | g |
|
Na2SeO3 x 5 H2O | 3.0 | mg |
|
Na2WO4 x 2 H2O | 4.0 | mg |
|
Distilled water | 1000.0 | ml |
Compound | Amount | Unit | |||
---|---|---|---|---|---|
|
Na2S x 9 H2O | 3 | g | ||
|
Distilled water | 100 | ml | ||
1 The sulfide solution is prepared in a 250 ml screw-capped bottle with a butyl rubber septum and a magnetic stirrer. The solution is bubbled with nitrogen gas, closed and autoclaved for 15 min. at 121°C. After cooling to room temperature the pH is adjusted to about 7.0 by adding of sterile 2 M H2SO4 drop-wise with a syringe without opening the bottle. |