Official DSMZ medium: This medium was manually curated by experts from the DSMZ.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaCl | 30.00 | g | 30 | 513.347 | |
MgSO4 x 7 H2O | 7.00 | g | 7 | 28.4 | |
MgCl2 x 6 H2O | 5.50 | g | 5.5 | 27.053 | |
KCl | 0.65 | g | 0.65 | 8.719 | |
NaBr | 0.10 | g | 0.1 | 0.972 | |
NH4Cl | 0.15 | g | 0.15 | 2.804 | |
K2HPO4 | 0.15 | g | 0.15 | 0.861 | |
CaCl2 x 2 H2O | 0.50 | g | 0.5 | 3.401 | |
Trace element solution | 10.00 | ml | - | - | |
Distilled water | 1000.00 | ml | - | - | |
1 Sparge medium with 100% N2 gas mixture for 20 min to make it anoxic. | |||||
2 Adjust pH to 6.5-6.8 with 1N H2SO4. | |||||
3 Fill 10 ml of medium in serum bottles (100 ml) under a protective H2/CO2 atmosphere and tightly stopper. | |||||
4 Autoclave at 121 °C for 15 min. | |||||
5 after autoclaving add the following filter-sterilized solutions. | |||||
Solution A
, 0.3 ml/10ml
(gassed with CO2) |
30.00 | ml/l | - | - | |
Solution B
, 0.3 ml/10ml
(gassed with N2) |
30.00 | ml/l | - | - | |
6 apply xx bar H2/CO2 (80%/20%) + yy % O2 (Note: strain specific conditions need to be applied) | |||||
7 For more details on the medium see the original description (Huber et al. System. Appl. Microbiol. 15:340-351 (1992)). |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Modified Wolin's mineral solution II | 1000 | ml | - | - | |
1 To 1000.0 ml trace element solution in medium 141 add: | |||||
(NH4)2Ni(SO4)2 | 2 | g | 2 | 5.063 | |
Na2WO4 | 10 | mg | 0.01 | 0.034 | |
Na2SeO4 | 10 | mg | 0.01 | 0.053 |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaHCO3 | 2 | g | 66.667 | 793.585 | |
Distilled water | 30 | ml | - | - | |
1 prepared under CO2 in an ice-bath, filter-sterilise |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Na2S2O3 x 5 H2O | 2 | g | 66.667 | 268.616 | |
Distilled water | 30 | ml | - | - | |
1 Prepared under N2,autoclave 121°C, 15 min |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 1.500 | g | 1.5 | 7.848 | |
MgSO4 x 7 H2O | 3.000 | g | 3 | 12.172 | |
MnSO4 x H2O | 0.500 | g | 0.5 | 2.958 | |
NaCl | 1.000 | g | 1 | 17.112 | |
FeSO4 x 7 H2O | 0.100 | g | 0.1 | 0.36 | |
CoSO4 x 7 H2O | 0.180 | g | 0.18 | 1.161 | |
CaCl2 x 2 H2O | 0.100 | g | 0.1 | 0.68 | |
ZnSO4 x 7 H2O | 0.180 | g | 0.18 | 0.626 | |
CuSO4 x 5 H2O | 0.010 | g | 0.01 | 0.04 | |
AlK(SO4)2 x 12 H2O | 0.020 | g | 0.02 | 0.042 | |
H3BO3 | 0.010 | g | 0.01 | 0.162 | |
Na2MoO4 x 2 H2O | 0.010 | g | 0.01 | 0.041 | |
NiCl2 x 6 H2O | 0.025 | g | 0.025 | 0.193 | |
Na2SeO3 x 5 H2O | 0.300 | mg | 3.0e-4 | 0.001 | |
Distilled water | 1000.000 | ml | - | - | |
1 First dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH, then add minerals. Adjust final to pH 7.0 with KOH. |
Last modified: | 11.01.24 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Defined medium |
Final pH: | 6.6 |
Equipment needed: | Autoclave, Filter |
Edit in Medium builder |
Detailed instructions for the cultivation of anaerobes including important warnings can be found in the cultivation instructions .
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
MgCl2 x 6 H2O | 5.5 | 27.053 |
NaHCO3 | 2 | 23.808 |
Na2S2O3 x 5 H2O | 2 | 8.058 |
KCl | 0.65 | 8.719 |
NH4Cl | 0.15 | 2.804 |
Show more |