Official DSMZ medium: This medium was manually curated by experts from the DSMZ.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Yeast extract | 1.00 | g | 0.947 | - | |
Glycyl-glycine | 1.00 | g | 0.947 | 7.168 | |
Na2HPO4 x 2 H2O | 0.10 | g | 0.095 | 0.667 | |
MgSO4 x 7 H2O | 0.10 | g | 0.095 | 0.384 | |
KNO3 | 0.10 | g | 0.095 | 0.937 | |
NaNO3 | 0.50 | g | 0.473 | 5.571 | |
NaCl | 0.10 | g | 0.095 | 1.62 | |
CaCl2 x 2 H2O | 0.05 | g | 0.047 | 0.322 | |
Fe(III) citrate
(0.1 g in 100 ml H2O) |
5.00 | ml | - | - | |
Trace element solution SL-6 | 1.00 | ml | - | - | |
Distilled water | 1050.00 | ml | - | - | |
1 Adjust pH to 8.2. | |||||
2 Boil the medium under a stream of nitrogen gas for a few minutes and distribute 10 ml medium into 15 ml hungate tubes. Bubble each tube with nitrogen gas and close immediately with a rubber septum and screw tight. | |||||
3 Autoclave at 121 °C for 15 min. | |||||
4 After autoclaving inject 0.1 ml of neutralized sulfide solution (0.03% end concentration) to each tube. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Na2S x 9 H2O | 3 | g | 30 | 124.905 | |
Distilled water | 100 | ml | - | - | |
1 The sulfide solution is prepared in a 250 ml screw-capped bottle with a butyl rubber septum and a magnetic stirrer. The solution is bubbled with nitrogen gas, closed and autoclaved for 15 min. at 121°C. After cooling to room temperature the pH is adjusted to about 7.0 by adding of sterile 2 M H2SO4 drop-wise with a syringe without opening the bottle. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
ZnSO4 x 7 H2O | 0.10 | g | 0.1 | 0.348 |
MnCl2 x 4 H2O | 0.03 | g | 0.03 | 0.152 |
H3BO3 | 0.30 | g | 0.3 | 4.851 |
CoCl2 x 6 H2O | 0.20 | g | 0.2 | 1.54 |
CuCl2 x 2 H2O | 0.01 | g | 0.01 | 0.059 |
NiCl2 x 6 H2O | 0.02 | g | 0.02 | 0.154 |
Na2MoO4 x 2 H2O | 0.03 | g | 0.03 | 0.124 |
Distilled water | 1000.00 | ml | - | - |
Last modified: | 08.05.24 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Complex medium |
Final pH: | 8.2 |
Equipment needed: | Autoclave |
Edit in Medium builder |
All strains for this medium: | 4 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
Glycyl-glycine | 0.947 | 7.168 |
Yeast extract | 0.947 | - |
NaNO3 | 0.473 | 5.571 |
NaCl | 0.095 | 1.62 |
KNO3 | 0.095 | 0.937 |
Show more |