Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Yeast extract
(BD-Difco) |
1.000 | g | 0.899 | - | |
NH4Cl | 0.535 | g | 0.481 | 8.994 | |
KH2PO4 | 0.136 | g | 0.122 | 0.899 | |
MgCl2 x 6 H2O | 3.050 | g | 2.743 | 13.491 | |
CaCl2 x 2 H2O | 0.147 | g | 0.132 | 0.899 | |
NaCl | 20.450 | g | 18.39 | 314.687 | |
NaHCO3 | 2.520 | g | 2.266 | 26.976 | |
Trace vitamins solution | 1.000 | ml | - | - | |
Trace element solution | 1.000 | ml | - | - | |
Resazurin | 1.000 | mg | 9.0e-4 | 0.004 | |
Distilled water | 1000.000 | ml | - | - | |
1 Solution B: | |||||
Glucose | 7.200 | g | 6.475 | 35.939 | |
Distilled water | 100.000 | ml | - | - | |
2 To complete the medium, add 0.1 volume of solution B to the culture vessels containing solution A. Prior to inoculation, aseptically and anaerobically add per liter the following solutions (autoclaved and stored under a N2 atmosphere): | |||||
L-Cysteine HCl x H2O
(3%) |
5.000 | ml | - | - | |
Na2S x 9 H2O
(3%) |
5.000 | ml | - | - | |
3 Solution A: | |||||
4 Mix components, except NaHCO3, and adjust pH to 7.5. Bring to a boil for 5-10 sec., then, cool down under a stream of N2-CO2 (80:20, v/v) and add NaHCO3 to the solution. Dispense 0.9 volume of the medium into culture vessels (e.g., 18 ml of the medium in 50 ml serum bottle) under a stream of N2-CO2 (80:20, v/v) and seal with butyl rubber stoppers. After autoclaving, stand the medium overnight. | |||||
5 Adjust pH to 7.5 and autoclave under a N2 atmosphere. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
Biotin | 4.9 | mg | 0.005 | 0.02 |
Folic acid | 8.8 | mg | 0.009 | 0.02 |
Pyridoxine hydrochloride | 4.1 | mg | 0.004 | - |
Thiamine HCl | 6.7 | mg | 0.007 | - |
Riboflavin | 7.5 | mg | 0.008 | 0.02 |
Nicotinic acid | 2.5 | mg | 0.003 | 0.02 |
DL-Calcium pantothenate | 9.5 | mg | 0.01 | 0.02 |
Vitamin B12 | 0.1 | mg | 1.0e-4 | 7.4e-5 |
p-Aminobenzoic acid | 2.7 | mg | 0.003 | 0.02 |
Lipoic acid | 4.1 | mg | 0.004 | 0.02 |
Distilled water | 1000.0 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
FeCl3 x 6 H2O | 1.27 | g | 1.27 | 4.699 |
MnCl2 x 4 H2O | 0.20 | g | 0.2 | - |
CoCl2 x 6 H2O | 0.13 | g | 0.13 | 1.001 |
ZnCl2 | 0.14 | g | 0.14 | 1.027 |
CuCl2 x 2 H2O | 1.00 | mg | 1.0e-3 | 0.006 |
AlCl3 | 0.01 | g | 0.01 | 0.075 |
H3BO3 | 6.00 | mg | 0.006 | 0.097 |
Na2MoO4 x 2 H2O | 0.02 | g | 0.02 | 0.083 |
NiCl2 x 6 H2O | 0.01 | g | 0.01 | 0.077 |
Na2SeO3 | 2.00 | mg | 0.002 | - |
Na2WO4 x 2 H2O | 3.00 | mg | 0.003 | 0.009 |
Distilled water | 1000.00 | ml | - | - |
Last modified: | 22.02.22 |
Source: | JCM |
Medium type: | Complex medium |
Final pH: | 7.5 |
Equipment needed: | Anaerobic workbench, Autoclave |
Edit in Medium builder |