Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaCl | 1.00 | g | 0.997 | 17.06 | |
KCl | 0.50 | g | 0.499 | 6.687 | |
MgCl2 x 6 H2O | 0.40 | g | 0.399 | 1.962 | |
CaCl2 x 2 H2O | 0.10 | g | 0.1 | 0.678 | |
KH2PO4 | 0.20 | g | 0.199 | 1.465 | |
NH4Cl | 0.50 | g | 0.499 | 9.32 | |
NaNO3 | 0.42 | g | 0.419 | 4.927 | |
Yeast extract | 1.00 | g | 0.997 | - | |
Trace element solution | 1.00 | ml | - | - | |
Selenite-tungstate solution | 1.00 | ml | - | - | |
Distilled water | 980.00 | ml | - | - | |
1 Mix components thoroughly and autoclave under a N2-CO2 (80:20, v/v) gas atmosphere. After cooling, add the following solutions (autoclaved or *filter-sterilized): | |||||
Vitamin solution
(*) |
1.00 | ml | - | - | |
Glucose
(1 M) |
5.00 | ml | - | - | |
NaHCO3
(*, 8%) |
15.00 | ml | - | - | |
2 Adjust pH to 7.0, if necessary. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 12.80 | g | - | - | |
FeSO4 x 7 H2O | 0.42 | g | - | - | |
H3BO3 | 0.01 | g | - | - | |
MnCl2 x 4 H2O | 0.10 | g | - | - | |
CoCl2 x 6 H2O | 0.17 | g | - | - | |
CuCl2 x 2 H2O | 0.02 | g | - | - | |
ZnSO4 x 7 H2O | 0.21 | g | - | - | |
Na2MoO4 x 2 H2O | 0.01 | g | - | - | |
1 Dissolve nitrilotriacetic acid in 800 ml distilled water and adjust pH to 6.5 with NaOH. Then proceed to add the minerals and bring volume to 1.0 L. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
NaOH | 0.4 | g | 0.4 | 10.001 |
Na2SeO3 x 5 H2O | 6.0 | mg | 0.006 | 0.023 |
Na2WO4 x 2 H2O | 8.0 | mg | 0.008 | 0.024 |
Distilled water | 1000.0 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
p-Aminobenzoic acid | 4 | mg | 0.04 | 0.292 |
Biotin | 1 | mg | 0.01 | 0.041 |
Nicotinic acid | 10 | mg | 0.1 | 0.812 |
DL-Calcium pantothenate | 5 | mg | 0.05 | 0.105 |
Pyridoxine hydrochloride | 10 | mg | 0.1 | - |
Sodium phosphate buffer
(10 mM, pH 7.1) |
100 | ml | - | - |
Last modified: | 22.02.22 |
Source: | JCM |
Medium type: | Complex medium |
Final pH: | 7.0 |
Equipment needed: | Autoclave, Filter |
Edit in Medium builder |