Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
KH2PO4 | 0.40 | g | 0.392 | 2.882 | |
NH4Cl | 0.90 | g | 0.882 | 16.496 | |
MgCl2 x 6 H2O | 0.36 | g | 0.353 | 1.736 | |
NaCl | 10.00 | g | 9.804 | 167.76 | |
Sodium acetate | 0.50 | g | 0.49 | 5.976 | |
Yeast extract
(BD-Difco) |
2.00 | g | 1.961 | - | |
Trypticase peptone
(BD-BBL) |
2.00 | g | 1.961 | - | |
Trace vitamins | 10.00 | ml | - | - | |
Trace element solution | 10.00 | ml | - | - | |
Na2CO3 | 5.00 | g | 4.902 | 46.25 | |
L-Cysteine HCl x H2O | 0.50 | g | 0.49 | - | |
Na2S x 9 H2O | 0.50 | g | 0.49 | 2.041 | |
Resazurin | 1.00 | mg | 9.8e-4 | 0.004 | |
Distilled water | 1000.00 | ml | - | - | |
1 Mix ingredients, except Na2CO3, L-cysteine x HCl x H2O and Na2S x 9H2O. Bring to a boil for 5-10 sec, then, cool down under a stream of H2-CO2 (80:20, v/v) and add Na2CO3. Dispense the medium into suitable culture vessels (e.g., 20 ml of the medium in 120 ml serum bottles) under a stream of H2-CO2 (80:20, v/v) and seal with butyl rubber stoppers. After autoclaving, stand the medium overnight. Separately autoclave cysteine x HCl and Na2S x 9H2O as 5% solutions, respectively, under a N2 atmosphere. Prior to inoculation, aseptically and anaerobically add the L-cysteine x HCl x H2O and Na2S x 9H2O solutions. Check pH of the medium to be around 7.5. Pressurize the inoculated bottles to 200 kPa H2-CO2 (80:20, v/v). |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
Biotin | 2.0 | mg | 0.002 | 0.008 |
Folic acid | 2.0 | mg | 0.002 | 0.005 |
Pyridoxine hydrochloride | 10.0 | mg | 0.01 | 0.049 |
Thiamine HCl | 5.0 | mg | 0.005 | 0.015 |
Riboflavin | 5.0 | mg | 0.005 | 0.013 |
Nicotinic acid | 5.0 | mg | 0.005 | 0.041 |
Calcium pantothenate | 5.0 | mg | 0.005 | 0.01 |
Vitamin B12 | 0.1 | mg | 1.0e-4 | 7.4e-5 |
p-Aminobenzoic acid | 5.0 | mg | 0.005 | 0.036 |
Lipoic acid | 5.0 | mg | 0.005 | 0.024 |
Distilled water | 1000.0 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 12.800 | g | 12.8 | 66.967 | |
FeCl3 x 6 H2O | 1.350 | g | 1.35 | 4.995 | |
MnCl2 x 4 H2O | 0.100 | g | 0.1 | - | |
CoCl2 x 6 H2O | 0.024 | g | 0.024 | 0.185 | |
CaCl2 x 2 H2O | 0.100 | g | 0.1 | 0.68 | |
ZnCl2 | 0.100 | g | 0.1 | 0.734 | |
CuCl2 x 2 H2O | 0.025 | g | 0.025 | 0.147 | |
H3BO3 | 0.010 | g | 0.01 | 0.162 | |
NaCl | 1.000 | g | 1 | 17.112 | |
NiCl2 x 6 H2O | 0.120 | g | 0.12 | 0.926 | |
Na2SeO3 x 5 H2O | 0.026 | g | 0.026 | 0.099 | |
Distilled water | 1000.000 | ml | - | - | |
1 Dissolve nitrilotriacetic acid first in 200 ml of distilled water, and adjust pH to 6.5 with KOH. Then add the remaining salts and adjust volume to 1.0 L. Readjust pH to 7.0 with KOH. | |||||
2 Comment: For strain JCM 10134, incubate with a 10-20% inoculum. |
Last modified: | 29.10.21 |
Source: | JCM |
Taxonomic range: | Archaea |
Medium type: | Complex medium |
Final pH: | n.d. |
Equipment needed: | Anaerobic workbench, Autoclave |
Edit in Medium builder |
All strains for this medium: | 1 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
NaCl | 9.814 | 167.928 |
Na2CO3 | 4.902 | 46.25 |
Yeast extract | 1.961 | - |
Trypticase peptone | 1.961 | - |
NH4Cl | 0.882 | 16.496 |
Show more |