DSMZ 465 . MINERAL MEDIUM PH 7.25

What is this page?
* Medium for Sphingobium xenophagum DSM 6383

(with 0.1 g/l yeast extract, add 0.5 g/l 2-naphthalenesulfonic acid from a filter-sterilized stock solution)


Growth conditions: more than 14 days aerobic 28 °C
Equipment needed: Autoclave

Final pH: 7.2

Select a strain (optional):

ml
Compound Amount Unit
Na2HPO4 x 2 H2O 3.50 g
KH2PO4 1.00 g
(NH4)2SO4 0.50 g
MgCl2 x 6 H2O 0.10 g
Ca(NO3)2 x 4 H2O 0.05 g
Trace element solution SL-4 1.00 ml
Yeast extract 0.10 g/l
Naphthalene sulfonic acid 0.50 g/l
Distilled water 1000.00 ml
1 pH 7.25
2 Rehydrate and cultivate lyophilized cells in the complex medium recommended for the specific strain (e.g. medium 1, 220, 535 or 830). After this reactivation, cultivate on mineral medium with the appropriate carbon source.

Main sol. 1 #

1000
Compound Amount Unit
Peptone 5 g
Meat extract 3 g
Agar , for solid medium 15 g
Distilled water 1000 ml
1 Adjust pH to 7.0.
2 For Bacillus strains the addition of 10.0 mg MnSO4 x H2O is recommended for sporulation.

Main sol. 220 #

1000
Compound Amount Unit
Casein peptone 15 g
Soy peptone 5 g
NaCl 5 g
Agar 15 g
Distilled water 1000 ml
1 Adjust pH to 7.3. Medium is identical with Tryptone Soya Agar (Oxoid CM 131).

Main sol. 535 #

1000
Compound Amount Unit
Trypticase soy broth
(BBL 11768, Oxoid CM129 or Merck 5459)
30 g
Agar 20 g
Distilled water 1000 ml
1 pH 7.3
2 Autoclave at 121°C for 15 min.

Main sol. 830 #

1000
Compound Amount Unit
Yeast extract 0.50 g
Proteose peptone
(Difco no. 3)
0.50 g
Casamino acids 0.50 g
Glucose 0.50 g
Starch
(soluble)
0.50 g
Na-pyruvate 0.30 g
K2HPO4 0.30 g
MgSO4 x 7 H2O 0.05 g
Agar 15.00 g
Distilled water 1000.00 ml
1 Final pH 7.2; adjust with crystalline K2HPO4 or KH2PO4 before adding agar. Add agar, heat medium to boiling to dissolve agar, and autoclave for 15 min at 121°C.

Trace element solution SL-4 #

1000
Compound Amount Unit
Na2-EDTA 0.50 g
FeSO4 x 7 H2O 0.20 g
ZnSO4 x 7 H2O 0.10 g
MnCl2 x 4 H2O 0.03 g
H3BO3 0.30 g
CoCl2 x 6 H2O 0.20 g
CuCl2 x 2 H2O 0.01 g
NiCl2 x 6 H2O 0.02 g
Na2MoO4 x 2 H2O 0.03 g
Distilled water 1000.00 ml
1 First dissolve EDTA in distilled water and adjust pH to 7.0 using 2 N NaOH; then add other compounds.