This medium was extracted automatically and has not been curated by experts, yet.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Solution 1 Mineral Salts | 700.000 | ml | - | - | |
Solution 2 NaHCO3 | 300.000 | ml | - | - | |
1 Prepare solution 1 (mineral salts) | |||||
2 Prepare solution 2 | |||||
3 Combine solutions 1 + 2. If desired aliquot into hungate tubes, filling them up fully. | |||||
4 Autoclave at 121 °C for 15 min. | |||||
5 Before inoculation add the following from anaerobic, sterile stock solutions. | |||||
Vitamine B12 | 40.000 | μg/l | - | - | |
Yeast extract | 0.010 | % | 0.1 | - | |
Sodium pyruvate | 0.050 | % | 0.5 | 4.544 | |
Na2S x 9 H2O
(from neutralized stock solution, pH 7) |
0.075 | % | 0.75 | 3.123 | |
6 check pH and adjust to 7.0 if necessary |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Double distilled water | 700.000 | ml | - | - | |
EDTA
(1% stock solution) |
1.000 | ml | 0.017 | 0.057 | |
MgSO4 x 7 H2O
(20% stock solution) |
1.000 | ml | 0.333 | 1.352 | |
CaCl2 x 2 H2O
(7.5% stock solution) |
0.075 | g | 0.125 | 0.85 | |
KH2PO4
(monobasic) |
0.500 | g | 0.833 | 6.124 | |
NaCl | 0.400 | g | 0.667 | 11.408 | |
NH4Cl | 0.400 | g | 0.667 | 12.463 | |
Na acetate | 1.000 | g | 1.667 | 20.317 | |
Trace elements | 1.000 | ml | - | - | |
MOPS
(5 mM) |
1.050 | g | 1.75 | 8.363 | |
1 Autoclave at 121°C for 15 min | |||||
2 Adjust pH to 7.0. | |||||
3 allow to cool before combining with solution 2 |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
NaHCO3 | 1 | g | 3.333 | 39.679 | |
Deionized water | 300 | ml | - | - | |
1 Boil briefly and bubble with CO2 for 30 minutes and filter sterilize into a sterile, gas-tight screw-cap bottle. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Na2S x 9 H2O | 0.75 | g | 7.5 | 31.226 | |
Water
(degassed) |
100.00 | ml | - | - | |
1 Degas water by bringing to a boil for a minute or two. Meanwhile, wash sulfide before weighing – using plastic-forceps, dip a small chunk into dd H2O and dry sulfide and forceps with lint-free wipes. Drop weighed sulfide chunk into the degassed water. | |||||
2 Autoclave at 121 °C for 15 min. | |||||
3 Adjust pH to 7.0. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
EDTA | 5.2 | g | 5.2 | 17.794 |
CoCl2 x 6 H2O | 190.0 | mg | 0.19 | 1.463 |
MnCl2 x 4 H2O | 0.1 | g | 0.1 | 0.505 |
FeCl2 x 4 H2O | 1.5 | g | 1.5 | 7.545 |
H3BO3 | 6.0 | mg | 0.006 | 0.097 |
CuCl2 x 2 H2O | 17.0 | mg | 0.017 | 0.1 |
Na2MoO4 x 2 H2O | 188.0 | mg | 0.188 | 0.777 |
NiCl2 x 6 H2O | 25.0 | mg | 0.025 | 0.193 |
ZnCl2 | 70.0 | mg | 0.07 | 0.514 |
VOSO4 x 2 H2O | 30.0 | mg | 0.03 | 0.151 |
Na2WO4 x 2 H2O | 2.0 | mg | 0.002 | 0.006 |
NaHSeO3 | 2.0 | mg | 0.002 | - |
Deionized water | 1000.0 | ml | - | - |
Last modified: | 06.11.23 |
Source: | DSMZ |
Taxonomic range: | Bacteria |
Medium type: | Defined medium |
Final pH: | 7.0 |
Equipment needed: | Autoclave |
Edit in Medium builder |
All strains for this medium: | 2 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
MOPS | 1.225 | 5.854 |
Na acetate | 1.167 | 14.222 |
NaHCO3 | 1 | 11.904 |
Na2S x 9 H2O | 0.75 | 3.123 |
KH2PO4 | 0.583 | 4.287 |
Show more |