Name: E31
Creator: MediaDive
License: http://creativecommons.org/licenses/by/4.0/

Mail sol. C31 #

ml

Solution occurs in 1 other media (first defined in Medium C31).

Compound	Amount	Unit	Conc. [g/L]	Conc. [mM]
Part 1	500	ml	-	-
Natural sea water (filtered and autoclaved)	500	ml	-	-
1 This medium is made up in 2 parts which are autoclaved separately at 15 psi and mixed aseptically (1:1), when cool. This avoids precipitation.
2 Alternatively, use 17.5g of “Ultramarine Synthetica” sea salts in 500ml of distilled water.

Part 1 #

500

Compound	Amount	Unit	Conc. [g/L]	Conc. [mM]
SE1 (Soil Extract 1)	50.00	ml	-	-
KNO₃	0.10	g	0.2	1.978
K₂HPO₄	0.01	g	0.02	0.115
MgSO₄ x 7 H₂O	0.01	g	0.02	0.081
Cyanocobalamine	0.10	μg	-	-
Thiamine HCl	50.00	μg	-	-
Biotine	0.10	μg	-	-
Distilled water	500.00	ml	-	-
1 Distilled water to 500 ml. Autoclave

1000

Solution occurs in 2 other media (first defined in Medium C30).

Compound	Amount	Conc. [g/L]	Conc. [mM]
Soil (air-dried)	trace	-	-
Distilled water	trace	-	-
1 Site selection for a good soil is very important and for most purposes a soil from undisturbed deciduous woodland is best. Sites to avoid are those showing obvious signs of man's activity and particular care should be taken to avoid areas where fertilizers, crop sprays or other toxic chemicals may have been used.
2 A rich loam with good crumb structure should be sought. Stones, roots and larger invertebrates should be removed during an initial sieving through a 1 cm mesh. The sieved soil should be spread to air dry and handpicked for smaller invertebrates and roots. It should be turned periodically and picked over again. When dry sieve through a finer mesh (2-4 mm) and store in an airtight container away from light and heat.
3 Soil is prepared as above. Air-dried soil and twice its volume of supernatant distilled water are autoclaved together at 15 psi for 2 hours and left to cool. The supernatant is then decanted and filtered through Whatman No 1 filter paper, then distributed to containers in volumes suitable for making up batches of media. The aliquots and their containers are autoclaved for an appropriate length of time (e.g. 1 litre or less for 15 minutes) and are then kept in a cool place (e.g. a refrigerator) until required.