Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Synthetic seawater (2 x)
(2 x) |
500.00 | ml | - | - | |
NaHCO3 | 0.16 | g | 0.156 | 1.858 | |
KH2PO4 | 0.50 | g | 0.488 | 3.585 | |
Trace minerals | 15.00 | ml | - | - | |
Ni-Se-W solution | 10.00 | ml | - | - | |
Bacto peptone
(BD-Difco) |
2.00 | g | 1.951 | - | |
Yeast extract
(BD-Difco) |
1.00 | g | 0.976 | - | |
Resazurin | 0.75 | mg | 7.3e-4 | 0.003 | |
Na2S x 9 H2O | 0.50 | g | 0.488 | 2.031 | |
Sulfur
(powder) |
10.00 | g | 9.756 | 304.213 | |
Distilled water | 500.00 | ml | - | - | |
1 Mix ingredients, except sulfur and Na2S x 9H2O, and adjust pH to 6.0 with H2SO4. Sterilize the medium by filtration. Steam sulfur for 3 hr on each of 3 successive days. Neutralize Na2S x 9H2O as a 5% solution, and autoclave under a N2 atmosphere. Distribute the medium and sulfur into culture vessels (e.g., 20 ml of the medium in 120 ml serum bottles) under a stream of H2-CO2 (4:1, v/v) gas mixture and seal with butyl rubber stoppers. Prior to inoculation, add the sterile Na2S x 9H2O solution, and readjust pH to 6.0 with sterile 1 N H2SO4. Pressurize the inoculated bottles to 200 kPa H2-CO2 (4:1, v/v). |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
NaCl | 55.40 | g | 55.4 | 947.981 |
MgSO4 x 7 H2O | 14.00 | g | 14 | 56.801 |
MgCl2 x 6 H2O | 11.00 | g | 11 | 54.106 |
KCl | 1.30 | g | 1.3 | 17.438 |
NaBr | 0.20 | g | 0.2 | 1.944 |
H3BO3 | 0.06 | g | 0.06 | 0.97 |
SrCl2 x 6 H2O | 0.03 | g | 0.03 | 0.113 |
KI | 0.10 | mg | 1.0e-4 | 3.9e-4 |
Trisodium citrate | 20.00 | mg | 0.02 | 0.077 |
CaCl2 x 2 H2O | 1.50 | g | 1.5 | 10.203 |
Distilled water | 1000.00 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
NiCl2 x 6 H2O | 25.0 | mg | 0.025 | 0.193 |
(NH4)2Ni(SO4)2 x 6 H2O | 2.0 | g | 2 | 5.063 |
Na2SeO3 | 0.3 | mg | 3.0e-4 | - |
Na2SeO4 | 10.0 | mg | 0.01 | 0.053 |
Na2WO4 x 2 H2O | 10.0 | mg | 0.01 | 0.03 |
Distilled water | 1000.0 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 1.50 | g | 1.5 | 7.848 | |
MgSO4 x 7 H2O | 3.00 | g | 3 | 12.172 | |
MnSO4 x n H2O | 0.50 | g | 0.5 | - | |
NaCl | 1.00 | g | 1 | 17.112 | |
FeSO4 x 7 H2O | 0.10 | g | 0.1 | 0.36 | |
CoSO4 x 7 H2O | 0.10 | g | 0.1 | 0.645 | |
CaCl2 x 2 H2O | 0.10 | g | 0.1 | 0.68 | |
ZnSO4 x 7 H2O | 0.10 | g | 0.1 | 0.348 | |
CuSO4 x 5 H2O | 0.01 | g | 0.01 | 0.04 | |
AlK(SO4)2 | 0.01 | g | 0.01 | 0.039 | |
H3BO3 | 0.01 | g | 0.01 | 0.162 | |
Na2MoO4 x 2 H2O | 0.01 | g | 0.01 | 0.041 | |
Distilled water | 1000.00 | ml | - | - | |
1 Dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH solution. Then proceed to add minerals. Adjust final pH to 7.0. |
Last modified: | 22.02.22 |
Source: | JCM |
Taxonomic range: | Archaea |
Medium type: | Complex medium |
Final pH: | 6.0 |
Equipment needed: | Autoclave, Filter |
Edit in Medium builder |
All strains for this medium: | 3 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
NaCl | 27.039 | 462.68 |
Sulfur | 9.756 | 304.213 |
MgSO4 x 7 H2O | 6.873 | 27.886 |
MgCl2 x 6 H2O | 5.366 | 26.393 |
Bacto peptone | 1.951 | - |
Show more |