Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
MJ(-N) synthetic seawater | 1000.00 | ml | - | - | |
NH4Cl | 0.25 | g | 0.246 | 4.605 | |
NaNO3 | 0.50 | g | 0.493 | 5.796 | |
Yeast extract | 1.00 | g | 0.985 | - | |
1 Mix components thoroughly. Distribute the medium into culture vessels (e.g., 20 ml medium in 50 ml serum bottles) under a N2-CO2 (4:1, v/v) gas mixture, seal with butyl rubber stoppers and autoclave. After cooling, add per liter the following solutions (*filter-sterilized or autoclaved, and stored anaerobically) to the medium: | |||||
NaHCO3
(*, 8.0%) |
5.00 | ml | - | - | |
Na2S x 9 H2O
(5.0%) |
10.00 | ml | - | - | |
2 Pressurize the culture vessels to 200 kPa N2-CO2 (4:1, v/v) . Check final pH to be 6.0-6.5. | |||||
3 Comment: MJ(-N) synthetic seawater can be replaced with commercially available synthetic seawater such as Jamarin S (Jamarin Laboratory). Addition of rumen fluid clarified (10.0 ml/L, see Medium No. 266) may stimulate growth. For strain JCM 15506, incubate with a 5-10% inoculum. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
NaCl | 30.00 | g | 29.703 | 508.264 |
K2HPO4 | 0.14 | g | 0.139 | 0.796 |
CaCl2 x 2 H2O | 0.14 | g | 0.139 | 0.943 |
MgSO4 x 7 H2O | 3.40 | g | 3.366 | 13.658 |
MgCl2 x 6 H2O | 4.18 | g | 4.139 | 20.357 |
KCl | 0.33 | g | 0.327 | 4.383 |
NiCl2 x 6 H2O | 0.50 | mg | 5.0e-4 | 0.004 |
Na2SeO3 x 5 H2O | 0.50 | mg | 5.0e-4 | 0.002 |
Fe(NH4)2(SO4)2 x 6 H2O | 0.01 | g | 0.01 | - |
Modified Wolin's mineral solution | 10.00 | ml | - | - |
Distilled water | 1000.00 | ml | - | - |
Last modified: | 22.02.22 |
Source: | JCM |
Medium type: | Complex medium |
Final pH: | 6.2 |
Equipment needed: | Anaerobic workbench, Autoclave, Filter |
Edit in Medium builder |