Inofficial medium: This medium was provided by external sources and is possibly not curated by experts.
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Trypticase peptone
(BD-BBL) |
2.000 | g | 1.961 | - | |
Yeast extract | 2.000 | g | 1.961 | - | |
Glucose | 4.000 | g | 3.922 | 21.767 | |
KH2PO4 | 0.225 | g | 0.221 | 1.621 | |
K2HPO4 | 0.255 | g | 0.25 | 1.435 | |
(NH4)2SO4 | 0.255 | g | 0.25 | 1.892 | |
NaCl | 0.500 | g | 0.49 | 8.388 | |
MgSO4 x 7 H2O | 0.100 | g | 0.098 | 0.398 | |
CaCl2 x 2 H2O | 0.070 | g | 0.069 | 0.467 | |
Sodium acetate x 3 H2O | 5.000 | g | 4.902 | - | |
Trace vitamins | 10.000 | ml | - | - | |
Trace minerals solution | 10.000 | ml | - | - | |
Resazurin | 1.000 | mg | 9.8e-4 | 0.004 | |
Distilled water | 1000.000 | ml | - | - | |
1 Mix components thoroughly. Bring to a boil for seconds, cool down under a N2-CO2 (4:1, v/v) gas mixture and add the following components to the medium: | |||||
NaHCO3 | 6.000 | g | 5.882 | 70.022 | |
L-Cysteine HCl x H2O | 0.500 | g | 0.49 | - | |
2 Seal with butyl rubber stoppers and autoclave. After inoculation, pressurize the inoculated bottles to 200 kPa with a N2-CO2 (4:1, v/v) gas mixture. |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
Trace minerals | 1000.00 | ml | - | - |
NiCl2 x 6 H2O | 0.03 | g | 0.03 | 0.231 |
Na2SeO3 x 5 H2O | 0.30 | mg | 3.0e-4 | 0.001 |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] |
---|---|---|---|---|
Biotin | 2.0 | mg | 0.002 | 0.008 |
Folic acid | 2.0 | mg | 0.002 | 0.005 |
Pyridoxine hydrochloride | 10.0 | mg | 0.01 | 0.049 |
Thiamine HCl | 5.0 | mg | 0.005 | 0.015 |
Riboflavin | 5.0 | mg | 0.005 | 0.013 |
Nicotinic acid | 5.0 | mg | 0.005 | 0.041 |
Calcium pantothenate | 5.0 | mg | 0.005 | 0.01 |
Vitamin B12 | 0.1 | mg | 1.0e-4 | 7.4e-5 |
p-Aminobenzoic acid | 5.0 | mg | 0.005 | 0.036 |
Lipoic acid | 5.0 | mg | 0.005 | 0.024 |
Distilled water | 1000.0 | ml | - | - |
Compound | Amount | Unit | Conc. [g/L] | Conc. [mM] | |
---|---|---|---|---|---|
Nitrilotriacetic acid | 1.50 | g | 1.5 | 7.848 | |
MgSO4 x 7 H2O | 3.00 | g | 3 | 12.172 | |
MnSO4 x n H2O | 0.50 | g | 0.5 | - | |
NaCl | 1.00 | g | 1 | 17.112 | |
FeSO4 x 7 H2O | 0.10 | g | 0.1 | 0.36 | |
CoSO4 x 7 H2O | 0.10 | g | 0.1 | 0.645 | |
CaCl2 x 2 H2O | 0.10 | g | 0.1 | 0.68 | |
ZnSO4 x 7 H2O | 0.10 | g | 0.1 | 0.348 | |
CuSO4 x 5 H2O | 0.01 | g | 0.01 | 0.04 | |
AlK(SO4)2 | 0.01 | g | 0.01 | 0.039 | |
H3BO3 | 0.01 | g | 0.01 | 0.162 | |
Na2MoO4 x 2 H2O | 0.01 | g | 0.01 | 0.041 | |
Distilled water | 1000.00 | ml | - | - | |
1 Dissolve nitrilotriacetic acid and adjust pH to 6.5 with KOH solution. Then proceed to add minerals. Adjust final pH to 7.0. |
Last modified: | 29.10.21 |
Source: | JCM |
Taxonomic range: | Bacteria |
Medium type: | Complex medium |
Final pH: | n.d. |
Equipment needed: | Autoclave |
Edit in Medium builder |
All strains for this medium: | 1 |
Compound | Conc. [g/L] | Conc. [mM] |
---|---|---|
NaHCO3 | 5.882 | 70.022 |
Sodium acetate x 3 H2O | 4.902 | - |
Glucose | 3.922 | 21.767 |
Trypticase peptone | 1.961 | - |
Yeast extract | 1.961 | - |
Show more |